6204-ZZC3 Metric Ball Bearing
6204-ZZC3 is a Precision Metric Ball Bearing manufactured with C3 Internal Clearance, both sides Metal Shielded and is pre-lubricated with grease allowing it to be ready for use upon delivery. Made from Chrome Steel, 6204-ZZC3 is a Metric Ball Bearing that can withstand both moderate radial and axial loads while providing high performance. Our 6200 Series Light Duty Ball Bearings designed with deep, close-contoured races offer a perfectly balanced bearing with the capacity to carry radial, thrust or combined loads. Our 6200 Series Ball Bearings are available with Open, Metal Shielded, and Rubber Sealed Closures and are pre-lubricated with grease or light oil.
Match Numbers / Interchange Numbers6204.2ZR.C3, 6204ZC3, 6204SSC3, 6204-ZZCM, 6204-2ZC3J1, 204KSFF, 204KDDC3, 77204, 1L017, 5972K329, 6153K58, 6204ZZC3
Applications / Industries
6204-ZZC3 Metric Ball Bearings are used in a range of applications from Electric Motors to Gearboxes, Belt Drives, Compressors, Pumps, Turbines, Printing And Textile Machines, Automotive, Conveyors, Light-duty Industrial Applications, Engines, Small Spindles, Food processing, Power Transmission, Rolling Mills, Among Others.
What are Metric Ball Bearings?
A Metric Ball Bearings is a type of rolling-element bearing that uses roller balls to separate two “races,” or bearing rings. These ball bearings have been manufactured to be metric sized. The combination of the roller balls and bearing rings help to reduce surface contact and rotational friction across moving planes to accommodate axial loads.
Metric Ball bearings help to facilitate motion by distributing loads and reducing friction for applications that have a high-speed requirement, ultimately aiding in extending the working life of your equipment.
What are Rolling-Element Bearings?
Rolling-element bearings, commonly called rolling bearings, are bearings that carry a load by utilizing “rolling elements” between two concentric, grooved rings called races. The motion of the bearing races allows for the rolling elements to move with very little resistance and with little slide variance.
Some common types of rolling elements include ball, cylindrical, spherical, barrel, needle, spindle, or tapered.
What is the Difference Between Open, Shielded, and Sealed Rolling Bearings?
The main difference between open and sealed/ shielded bearings is the application of lubrication. The main difference between sealed and shielded bearings is the presence of a protective enclosure.
- Sealed and shielded bearings are lubricated with grease in the bearing factory. However, a rubber sealed bearing protects the bearing by using a seal that contacts the inner and outer race. This provides superior protection at the cost of operating speed and temperature.
- Open bearings are meant to be lubricated with light oil, with periodic reapplication of lubrication, based on use.
- Shielded rolling bearings contain an enclosure that helps to protect the working parts of the bearing from environmental debris that may be introduced and would otherwise reduce the ball bearing speed and lifespan. This metal shield is stamped onto the bearing and only contacts the outer ring, this allows for protection without sacrificing operating speed or temperature.
No posts found