UC Series Insert Bearing has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring.
UC 200 Series Insert Bearing is self-aligning for standard load capacity. This specific arrangement is suitable for application as where the direction of rotation is alternative.
The UC200 Series Insert Bearing are widely used as replacement bearings for Pillow Blocks, 2-Bolt Flanges, 3-Bolt Flanges, 4 Bolt Flanges, Take-Up Units, and many more. It can be costly to replace the whole unit however, buying just the replacement for the insert bearing can save you from over spending.
Sizes: ID 2-3/8" inch x OD 110mm x W 65.1mm Insert Ball Bearing With Set Screw
Insert Ball Bearing With Set Screw Size: ID: 75mm x OD: 130mm x W: 77.8mm Ref#: UC215D1,UC215S,1075-75G,...
Shaft Size: 2-1/2 Inches Set Screw Insert Ball Bearing Both Sides Felt Sealed, Lubrication Groove and pre-lubricated with Grease
Sizes: ID 2 7/16 inch x OD 110mm x W 65.1mm Insert Ball Bearing With Set Screw
Sizes: ID 2-1/4" x OD 110mm x W 65mm Insert Ball Bearing Set Screw Locking Both Sides Sealed and pre-lubricated
Insert Ball Bearing With Set Screw
Insert Ball Bearing With Set Screw
Insert Ball Bearing With Set Screw
Sizes: ID 2" inches x OD 90mm x W 51.6mm Insert Ball Bearing with Set Screw
Sizes: ID 1-15/16" Inches x OD 90mm x W 52mm Set Screw Insert Ball Bearing Sealed
Shaft Size: 50mm Insert Ball Bearing Sealed on Both Sides, Set Screw, grease feeding groove and pre-lubricated with Grease
Insert Ball Bearing with Set Screw
Insert Ball Bearing with Set Screw
Sizes: ID 1-5/8" x OD 85mm x W 49mm Insert Ball Bearing Set Screw Locking System with Lub-groove
Insert Ball Bearing With Set Screw
1 9/16 inch x80mmx49mm Insert Ball Bearing With Set Screw
Sizes: ID 1-1/2 inch x OD 80mm x W 49mm | Insert Ball Bearing With Set Screw
Sizes: ID 40mm x OD 80mm x W 49mm Insert Ball Bearing with Set Screw
Bore Size: 1.4375" (1-7/16") Inches Insert Ball Bearing set screw and pre-lubricated
Bore Size: 1.3750" (1-3/8") Inches Insert Ball Bearing set screw and pre-lubricated