Close

Mounted Block Bearings 

There are no products in this category.

Mounted bearings and mounted ball bearing units provide much-needed support and stability. Whether you require a pillow block or flange bearing, these models can be bolted onto a variety of surfaces for optimal ease of use. 

Our inventory features a variety of mounted housing ball bearings, including pillow block bearings, flanged ball bearings (two, three, and four-bolt), take-up units, conveyor hangers, bracket flanges, and insert ball bearings. These bearings are available in cast iron, pressed steel, stainless steel, and nickel-plated models. 

Subcategories

  • UP000-KP000 Series...

    Clean Series UP000 & KP00 Extra Light Duty Pillow Block with Set screw or Eccentric Locking Collar Ball Bearing & Zinc Housing Unit Bearings

  • SAPP200 Series-Press...

    SAPP200 Series-Press Steel Pillow Block with Eccentric Bore & Locking Collor complete Unit Bearings

    See Specs in CATALOG

  • SBPP200 Series-Press...

    SBPP200 Series-Press Steel Pillow Block with Set Screw Ball Bearing as Unit Bearings

  • UCP200-Pillow Block...

    Pillow Block Housing with Setscrew Ball Bearing - Light Duty

    Common usage for UCP200 Series Pillow Block Bearing include: Agriculture, Automotive, Construction, Pump, Manufacturing Equipment, Sporting and Consumer Goods, Conveyor and Fan Assemblies, Farm Machinery, HVAC, Feed Mill, Economical housed bearing solution and many other Industrial Equipment.

  • SUCSP200 Series...

    SUCSP200 Series Stainless Steel Pillow Block with Stainnless Steel Set Screw Ball Bearing in one Unit

  • UCPA200-Tapped Based...

    UCPA200-Tapped Based Pillow Block with Set Screw Ball Bearing as Unit Bearings

  • UCPH200 Series...

    UCPH200 Series Pedestal Pillow Block with Set Screw Ball Bearing & Grease feeding access, in one Unit

  • UFL000-KFL000 Zink...
  • SAFTD200 Series...

    CAST IRON OVAL FLANGE STANDARD DUTY DUCTILE 2 BOLT HOUSING WITH LOCKING COLLAR BALL BEARING UNIT

  • SBFTD200 Series...

    CAST IRON OVAL FLANGE STANDARD DUTY DUCTILE 2 BOLT HOUSING WITH SET SCREW BALL BEARING UNIT

  • SAPFL200 Series Press...

    Press Steel Oval Shap 2 Bolt Flange Light Duty Housing with Eccentric Locking Collar Ball Bearing in Unit

  • SBPFL200 Series Press...

    SBPFL200 Series Press Steel Oval Shap 2 Bolt Flange Housing with Set Screw Ball Bearing, Pre-Lubricated

  • UCFL200 Series 2 Bolt...

    2-Bolt Oval Flange Bearings are equipped with a combination of a chrome steel set screw insert bearing with a housing of a oval cast iron 2-Bolt Flange. 
    UCFL200 Series is a standard duty with a set screw lock and available with set screw or eccentric locking collar, corrosion resistant housing and bearing options include cast iron, stainless steel, thermoplastic, and nickel plating, B-type seals or L3 triple seals available for extra sealing needs, wide inner race bearing, and available with high temperature bearings. This specific bearing insert has two grub screws to allow tightening against the shaft once fitted. The inserts are can be removed from the housing for future replacement if required.

    Common usage for UCFL200 Series include the following: Automotive, Agricultural, Construction, Consumer Goods, Conveyor and Fan Assemblies, Pump, Sporting, Manufacturing Equipment, Farm Machinery, and Industrial Equipment's.

    Dimensions and Specs Catalog

  • SUCSFL200 Series 2...

    SUCSFL200 Series are Complete Stainless SteelOval Flange Housing with 2 Bolt Hole with Stainless Steel Set Screw Ball Bearing in Unit, Pre-Lubricated with Grease

  • SAPF200 Series Press...

    SAPF200 Series Press Steel 3 Bolt Flange & Locking Collar Ball Bearing in Unit, Pre-Lubricated

  • SBPF200 Series Press...

    SBPF200 Series Press Steel 3 Bolt Flange & Set Screw Ball Bearing in Unit, Pre-Lubricated

  • UCF200 Series 4 Bolt...

    UCF200 Series 4-Bolt Flange Bearing has a unique combination of a set screw chrome steel insert bearing with a slinger seal design. As for the housing it is cast iron with a 4-Bolt Flange with an anti-rotation device. 
    Standard duty with a set screw lock is available with set screw or eccentric locking collar, wide inner race bearing, B-type seals or L3 triple lip seals available for extra sealing needs, also available with high temperature bearings, and corrosion resistant housing and bearing options includes cast iron, stainless steel, thermoplastic, and nickel plating.

    UCF200 Series Usage: Automotive, Agricultural, Construction, Consumer Goods, Conveyor and Fan Assemblies, Pump, Sporting, Manufacturing Equipment, Farm Machinery, and Industrial Equipment's.

    See Specs Catalog

  • SUCSF200 Series 4 Bolt...
    STAINLESS STEEL SQUARE FLANGE 4 BOLT LIGHT DUTY HOUSING WITH STAINLESS STEEL SET SCREW BALL BEARING IN UNIT
  • UCFC200 Series Round...

    Cast Iron Cartridge 4 Bolt Flange Housing with Set Screw Ball Bearing in Unit and Grease Feeding Access

  • 3-Bolt Bracket Flange...

    Bracket Type Flange 3-Bolt mounting with Set Screw Ball Bearing in Unit Bearing

  • Take-Up Flange Unit...

    Take-Up Flange with Set Screw Ball Bearing & pre-lubricated with Grease Feeding Access in Unit

  • Conveyor Hanger Flange...

    Conveyor Hanger Flange with Set Screw Ball Bearing in Unit Bearing

Close