CRY20VUU
New
Sizes: ID 3/8" x OD: 1-1/4" x W: 13/16" Inches
Yoke Track Needle Roller Sealed Bearing
43 Item Items
In Stock
Warning: Last items in stock!
Availability date:
1-1/4" YCRS-20 Yoke Track Needle Roller Sealed Bearing CRY20VUU
Sizes: ID 3/8" x OD: 1-1/4" x W: 13/16" Inches
Yoke Track Needle Roller Sealed Bearing
Recipient :
* Required fields
or Cancel
Quantity | Price | You Save |
---|---|---|
10 | $17.58 | Up to $9.25 |
24 | $16.65 | Up to $44.40 |
CRY20VUU bearing is Precision Cam Follower Yoke Track Needle Roller Rubber Sealed Bearing
Sizes: ID 3/8" x OD: 1-1/4" x W: 13/16" Inches
Match#: YCRS20, CRY20V, YCRS-20, CRY-20VUU, RF20PP, NACV20XLL, CYR1-1/4S, YR1-1/4X, Y40L
Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporated in a thick walled outer ring. Both crowned and cylindrical outer rings are available. The outer rings run directly on mating track surfaces, and the crowned outer ring is effective in relieving the edge load caused by mounting errors. The cylindrical outer ring, on the other hand, has a large contact area with the mating track surface and is suitable for applications involving large loads or low track surface hardness. In Roller Followers, there are two types of bearings available, the caged type and the full complement type. The caged type is useful for applications at high-speed rotation. The full complement type, on the other hand, is suitable for heavy-load applications at low-speed rotation or oscillating motions. Roller Followers include separable and non-separable types. Also, in addition to the open type, shield type and sealed type are available. The clearances between the side plates and outer ring of the shield type are narrow, and form labyrinths. In the sealed, special synthetic rubber seals are assembled in these clearances, and they are effective in preventing penetration of dust and dirt. These bearings are available in a variety of types to suit almost any kind of application. They are widely used for cam mechanisms and for linear motions of conveying equipment.
SIZES | ID: 3/8 x OD: 1-1/4 x W: 13/16 |
MATERIAL | Chrome Steel SAE-52100 |
LUBRICATION | Chevron SRI-2 Grease |
Interchange No | YCRS20, CRY20V, YCRS-20, CRY-20VUU, RF20PP, NACV20XLL, CYR1-1/4S, YR1-1/4X, Y40L |
Cam Follower Needle Roller Bearing
Cam Follower Needle Roller Bearing
Sizes: ID 5/16" x OD 1-1/8" x W 11/16" Inches Yoke Track Needle Roller Bearing Sealed Black Oxide and pre-lubricated
Sizes: OD 1-3/4" x L 1" x W 1" x Stud 1" Inches Cam Follower Needle Roller Bearing Full Complement Type With Hexagon Hole, Rubber Sealed and...
No customer reviews for the moment.