Sale! HK1614-2RS Needle Roller Bearing Sealed View larger

HK1614-2RS Needle Roller Bearing 16x22x14 Sealed HK-1614RS

HK1614-2RS

New

Sizes: ID 16mm x OD 22mm x L 14mm 

Shell Drawn Cup Caged Needle Roller Bearing Rubber Sealed 

More details

2433 Items

In Stock

0

$4.99

Add to my wishlist

Shipping Rates

Volume discounts

QuantityPriceYou Save
10 $4.74 Up to $2.50
25 $4.49 Up to $12.48
50 $4.24 Up to $37.43
100 $3.74 Up to $124.75

Data sheet

SIZESID 16mm x OD 22mm x L 14mm
MATERIALChrome Steel SAE-52100
LUBRICATIONLight Oil
SPEED LIMIT15,000 RPM
BASIC LOAD RATINGDynamic: 2450 Lbf | Static: 3450 Lbf
BRANDAMPEC
Interchange NoHK1614RS, BK1614FF, TLA1614ZUUOH, 16BTM2214AUU, RHK-1614RS, FJV-1614DD

More info

HK1614-2RS Drawn Shell Cup Caged Needle Roller Bearing with Both Sides Rubber Sealed

Sizes: ID 16mm x OD 22mm x L 14mm

Match#: HK1614.2RS, BK1614FF, TA1614ZUUOH, 16BTM2214AUU, RHK-1614RS, FJV-1614DD

This HK-1614-2RS caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The steel cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance, and have contoured ends to optimize the distribution of contact stress. This HK1614-2RS Needle Roller Bearing is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

HK1614 Drawn cup needle roller bearings of the HK series are needle roller bearings with chipless manufactured thin-walled outer rings. Drawn cup needle roller bearings are open on both sides. Essential features of the HK series are the extremely low section height and the high load carrying capacity. They are primarily used if the housing bores cannot be designed as raceways for needle roller and cage assemblies and in case of aiming at particularly space-saving and efficient storage. HK-1614-2RS drawn cup needle roller bearings are easy to assemble, since they are simply pressed into the housing bore and do not require any further axial fixation.

Reviews

Write a review

HK1614-2RS Needle Roller Bearing 16x22x14 Sealed HK-1614RS

HK1614-2RS Needle Roller Bearing 16x22x14 Sealed HK-1614RS

Sizes: ID 16mm x OD 22mm x L 14mm 

Shell Drawn Cup Caged Needle Roller Bearing Rubber Sealed 

0

Accessories