AMPEC

JLM506849-JLM506810 Japanese Tapered Roller Bearing Set 55x90x23mm ITJ

JLM506849/10 Tapered Roller Bearing Key Features JLM506849/10 is a Japanese Tapered Roller Bearing consisting of a two piece cup and cone assembly. The outer ring makes up the cup and the inner ring,...

BA-116Z Needle Roller Bearing 11/16x7/8x3/8

This J116 Caged Drawn Shell Cup Needle Roller Bearing has a steel cage and is suitable for applications with high dynamic loads. The steel cage provides guidance and even spacing of the rollers for...

COM-08 Plain Spherical Ball Bearing 1/2x1x1/2 COM8

COM-08 Plain Spherical Ball Bearing Key Features COM-08 is a Chrome Steel Plain Spherical Ball Bearing. This COM-08 bearing incorporates the single piece race type construction, also providing...

6702-ZZ-14 Ball Bearing 14x21x4mm Shielded

6702-ZZ-14 Ball Bearing Key Features 6702-ZZ-14 is a Thin High Speed Ball Bearing manufactured with a special 14mm bore, Metal Shields on both sides and is pre-lubricated with Grease, allowing it to...

KT162220C3 Caged Needle Roller Bearing 16x22x20mm

KT162220C3 Caged Needle Roller Bearings are manufactured with a steel cage, making are suitable for applications with high dynamic loads. Additionally, these are applied in a variety of applications...

MR32SS Machined Needle Roller Bearing 2x2-9/16x1-1/4 Sealed

MR32SS is a chrome steel machined needle roller bearing that has been pre-lubricated with light oil, allowing for immediate use upon delivery. This bearing features a two rubber lips on both sides...

JD8843 John Deere Needle Roller Bearing Replacement

JD8843 is a needle roller bearing designed to be used in John Deere agricultural products. This bearing has been made from high quality chrome steel and has been pre-lubricated using light oil,...

AL39377 John Deere Roller Bearing Replacement

AL39377 is a roller bearing designed for use in John Deere applications. This bearing is designed to reduce friction while supporting radial and axial loads. This bearing has been made from quality...

TRB-3446 Thrust Washer 2-1/8x2-7/8x1/16

TRB-3446 is a Thrust Washer that serves as a raceway surface for the thrust assembly’s rolling elements and can be used as a shaft washer (bore-piloting washer) fixed on the shaft or a housing...

608-2RS-16 Sealed Ball Bearing 5/16" bore

608-2RS-16 Miniature Ball Bearing Key Features 608-2RS-16 is an ABEC1 Precision Radial Miniature Ball Bearing manufactured with a special 5/16" inch bore, Rubber Seals on both sides and is...

SFC24L48 Precision Linear Shaft 1-1/2" OD

SFC24L48 Precision Linear Shaft Key Features SFC24L48 is a Precision Linear Shaft with an outer diameter of 1-1/2 Inches and has been polished and pre-cut to a length of 36 Inches. SFC24L48 Linear...

SFC24L36 Precision Linear Shaft 1-1/2" OD

SFC24L36 Precision Linear Shaft Key Features SFC24L36 is a Precision Linear Shaft with an outer diameter of 1-1/2 Inches and has been polished and pre-cut to a length of 36 Inches. SFC24L36 Linear...