Bore Size
Outside Size
Width Size

608-ZZCB Miniature Ceramic Si3N4 Ball Bearing 8x22x7 Shielded

Save 38%
608-ZZC
$8.64
$13.90
You save: $5.26
Availability: 113 item(s)
25 days

608-ZZCB Miniature Ceramic Ball Bearing

Key Features

608-ZZCB is a Precision Miniature Ball Bearing manufactured with Chrome Steel Rings and Si3N4 Ceramic Balls inside the bearing as a rolling element. The Ceramic Balls are made from Silicon Nitride making them more corrosion resistant, heat resistant, and require less lubrication compared to its steel ball counterparts. 608-ZZ is metal shielded on both sides and is pre-lubricated with grease, allowing it to be ready for use upon delivery. Our 600 Series Bearings have a larger OD which can assist in high speed applications as well as large load capacity applications.

Match Numbers / Interchange Numbers

608ZZC, MR608-ZZC, MBR2280ZZC

Applications / Industries

608-ZZCB Miniature ball bearings are used in a range of applications from Electric Motors to Skating or Skateboards, Hand Pieces, Hobby, RC Helicopters, RC Planes, RC Trucks, RC Cars, Beam Ball Bearing, Electric Scooters, High Speed Applications and many more.

What are Ball Bearings?

A ball bearing is a type of rolling-element bearing that uses roller balls to separate two “races,” or bearing rings. The combination of the roller balls and bearing rings help to reduce surface contact and rotational friction across moving planes to accommodate axial loads.

Ball bearings help to facilitate motion by distributing loads and reducing friction for applications that have a high-speed requirement, ultimately aiding in extending the working life of your equipment.

What are Rolling-Element Bearings?

Rolling-element bearings, commonly called rolling bearings, are bearings that carry a load by utilizing “rolling elements” between two concentric, grooved rings called races. The motion of the bearing races allows for the rolling elements to move with very little resistance and with little slide variance.

Some common types of rolling elements include ball, cylindrical, spherical, barrel, needle, spindle, or tapered.

What is the Difference Between Open, Shielded, and Sealed Rolling Bearings? 

The main difference between open and sealed/ shielded bearings is the application of lubrication. The main difference between sealed and shielded bearings is the presence of a protective enclosure.

  • Sealed and shielded bearings are both lubricated with oil or grease in the bearing factory. However, a rubber sealed bearing protects the bearing by using a seal that contacts the inner and outer race. This provides superior protection at the cost of operating speed and temperature.
  • Open bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.
  • Shielded rolling bearings contain an enclosure that helps to protect the working parts of the bearing from environmental debris that may be introduced and would otherwise reduce the ball bearing speed and lifespan. This metal shield is stamped onto the bearing and only contacts the outer ring, this allows for protection without sacrificing operating speed or temperature.
CATALOG
Online Catalog:
Dimensions & Material
Inner Diameter:
8mm
Outer Diameter:
22mm
Width:
7mm
Material:
Chrome Steel SAE-52100
Lubrication:
Chevron SRI-2 Grease
Sizes:
ID: 8mm x OD: 22mm x W: 7mm
Product Details
Closure Type:
ZZ Metal Shielded on Both Sides
Speed Limit:
Grease: 34,000 RPM | Oil: 40,000 RPM
Basic Load Ratings:
Static (Cor) : 311 lbf | Dynamic (Cr) : 741 lbf
Interchange Numbers:
608ZZC, MR608-ZZC, MBR2280ZZC

No posts found

Have you used the product?

Tell us something about it and help others to make the right decision

Write a review
608-ZZCB Miniature Ceramic Si3N4 Ball Bearing 8x22x7 Shielded

The answer to your request will be sent to your email address.

Possibly you may be interested
Fast and high quality delivery

Our company makes delivery all over the country

Returns within 25 days of delivery

You have 25 days to process a return