Bore Size: 1-1/4" Inch
High quality 1-1/4" pillow block bearing. The bearing has a wide inner ring with an eccentric insert ball bearing with a locking collar and a set screw for attaching to the shaft.
Housing is cast iron with a grease zerk for re-lubing the bearing.
60 Item Items
Warning: Last items in stock!
HCP207-20 has a combination of a cast iron pillow block housing with an anti-rotation device with self-alignment and an eccentric chrome steel insert ball bearing with a locking collar and a set screw for attaching to the shaft. This specific unit is a standard duty pillow block bearing with a wide inner ring and an eccentric locking collar and a cast iron unit with the standard base to center height with a grease fitting.
HCP200 Series Pillow Block Bearing is equipped with an eccentric insert ball bearing with a locking collar and a set screw for attaching to the shaft.
Accepts 1-1/4" Inch Shaft Size
Match#: UGP207-20, HCP207-20, VPE-220, NAP207-20
|SIZES||Bore Size: 1-1/4" Inch|
|MATERIAL||Cast Iron Housing with Chrome Steel SAE-52100 Ball Bearing|
|LUBRICATION||Chevron SRI-2 Grease|
|Interchange No||UGP207-20, HCP207-20, VPE-220, NAP207-20|
Shaft Size: 1" Inch All Stainless Steel Square Flange 4 Bolt housing with Set Screw Stainless Steel Ball Bearing and Grease feeding Unit,...
Shaft Size: 1" Inch Complete Stainless Steel Pillow Block Unit
Bore Size: 1" Inch 2 Bolt Flange Housing with Set Screw Sealed Ball Bearing
Shaft Sizes: 1-1/4" (1.250) Pillow Block Housing with Set Screw Insert Ball Bearing, Sealed and pre-lubricated with Grease
Shaft Size: 1" Inch Cast Iron Tapped Based Pillow Block Bearing with Set Screw, pre-Lubricated with Grease and Grease Feeding Access
Pedestal Pillow Block Unit
Shaft Size: 1" Inch Take Up Unit with Set Screw Ball Bearing
No customer reviews for the moment.