AMPEC

ST211-1-3/4 Disk Harrow Unit 1-3/4" Bore

ST211-1-3/4 Disk Harrow Unit Key Features ST211-1-3/4 is a Disk Harrow Unit with a round bore and are made with triple lip seals to protect from corrosive environments. The seal is a one piece shroud...

17392 Shaft Grease Seal Oil Seal 1-3/4x2-1/2x1/4

17392 Oil Seal Key Features 17392 is Metal Case Oil and Grease Seal with a Double Lip and a Steel Spring Loader. Metric Oil Seals are primarily used to prevent leakage onto moving parts while also...

TRA-2840 Thrust Washer 1-3/4x2-1/2x1/32

TRA2840 Thrust Washers Key Features TRA2840 Thrust Bearing Washers are designed for use with thrust needle roller and cage assemblies in applications where adjacent components cannot serve as...

17231 Shaft Grease Seal 1-3/4x2-1/4x5/16

17231 Oil Seal Key Features 17231 is a Metal Case Oil and Grease Seal with a Double Lip and a Steel Spring Loader. Metric Oil Seals are primarily used to prevent leakage onto moving parts while also...

UCX09-28 Set Screw Locking Insert Ball Bearing 1-3/4x90x24mm

UCX09-28 Set Screw Locking Insert Ball Bearing Key Features UCX09-28 is a Set Screw Locking Insert Bearing with lubricating groove access, and a wide inner ring. This UCX09-28 Insert Ball Bearing is...

NTA-2840 Thrust Caged Needle Roller Bearing 1-3/4 x 2-1/2 x 5/64

NTA2840 Thrust Needle Roller Bearing Key Features NTA2840 is a Thrust Caged Needle Roller Bearing designed for use with TRB-Series thrust washer and cage assemblies in applications where adjacent...

1-3/4" bore CSA209-28 Eccentric Insert Ball Bearing Cylindrical YET209-112

CSA209-28 Cylindrical Insert Ball Bearing Key Features CSA209-28 is an Eccentric Bore Light Duty Insert Ball Bearing with a Cylindrical Outer Race & Locking Collar. The locking collar has been...

UCHA209-28 Conveyor Hanger Set Screw Ball Bearing 1-3/4" Bore

UCHA209-28 Conveyor Hanger Ball Bearing Key Features UCHA209-28 is a Conveyor Hanger Unit equipped with a Set Screw Locking Ball Bearing manufactured with a wider inner ring and is pre-lubricated...

HCFS209-28 Four-Bolt Flange Eccentric Bearing Unit 1-3/4

HCFS209-28 4-Bolt Flanged Mounted Block Unit Key Features HCFS209-28 is a 4-Bolt Flange Unit with a wide inner ring with two set screws. This unit features a Cast Iron 4-Bolt Flange Housing and...

25580 Tapered Roller Cone 1-3/4" Bore

25580 Tapered Roller Cone Key Features 25580 Tapered Roller Bearings consist of a single piece cone made up of the rollers and cage assembly. This bearing is designed to be paired with a cup, the...

25580+25520 Tapered Roller Bearing Set 1-3/4x3-17/64x3/4 Inches

25580/25520 Tapered Roller Bearings Key Features 25580/25520 Tapered Roller Bearings consist of a two piece cup and cone assembly. The outer ring of this bearing makes up the cup and the inner ring,...

UCST209-28 Take Up Unit w/ Set Screw Ball Bearing Shaft Size 1-3/4

UCST209-28 Wide Slot Take-Up Bearing Key Features UCST209-28 is a Take-Up Mounted Block Unit with a 17.5mm slot size and is equipped with a set screw locking insert ball bearing. This specific Unit...