Bore Size: 3/4" Inches
Pedestal Pillow Block Unit
47 Item Items
Warning: Last items in stock!
UCPH204-12 Cast Iron Pedestal Pillow Block Housing with Set Screw, Pre Lubricated with Grease & Grease Feeding Access
Accept 3/4" Inches
UCPH204-12 Pedestal High Center Height Pillow Block Bearing Unit is equipped with a unique design that is two set screws positioned in the inner ring of the ball of the ball bearing to lock onto the shaft. The pillow block set screws placement is at a 90 degree angle to optimize balance between holding power and inner ring distortion.
This features a positive contact, 3 piece, fiber embedded R-seal for protections against harmful contaminants for damage protection and retain lubricant. Installing the set screw locking mechanism on the pillow block is quite simple and well suited for reversing applications and normal loads.
UCPH200 Series High Center Pillow Block Bearing common usage include: Construction, Conveyors, Food and Beverage, Packaging and General Industrial Equipment's.
Match#: UCPH 204-12, UCPH204-12, UCHP204-012T
|SIZES||Bore Size 3/4" Inches|
|MATERIAL||Housing PH204 : Cast Iron | Insert Bearing UC204-12 : Chrome Steel SAE-52100|
|LUBRICATION||Chevron SRI-2 Grease|
|Interchange No||UCPH-204-12, UCPH204-12, UCHP204-012T|
Pressed Steel Pillow Block with Eccentric Locking Collar Ball Bearing Shaft Size: 3/4" (.750) Ref#: PB3/4, 47PB-ST, PS25x3/4, SAPP204-12F,...
Press Steel Pillow Block with Set Screws Ball Bearing Shaft Size: 3/4" (.750) Ref#: PB3/4, 47PB-ST, PS25x3/4, SAPP204-12F, P2BSLX-3/4,...
Bore Size: 3/4" Inches | Square Flange 4-Bolt Housing with Set Screw Locking Ball Bearing
Round Flange 4 Bolt Flange Light Duty Housing with with Set Screw Bearing in Unit, Pre Lubricated with Grease For 3/4 inch Shaft Size
Shaft Size: 3/4" (.7500) Inches 3/4" Pillow Block Housing with Set Screw Insert Ball Bearing, Sealed and pre-lubricated with Grease
Bore size 3/4" Inches Take Up Unit with Set Screw Ball Bearing
Sizes: ID 5/8" x OD 47mm x W 14mm Special Size Ball Bearing, Rubber Sealed
Sizes: ID 3/4" x OD 47mm x W 14mm Radial Ball Bearing Both Sides Rubber Sealed 204PP4-Z22
Sizes: ID 7/8" x OD 47mm x W 14mm Radial Ball Bearing Both Sides Rubber Sealed and pre-Lubricated with Grease
No customer reviews for the moment.