NJ200 and NJ2200 Cylindrical Roller Bearings

NJ200-NJ2200 Series Removable Inner Race

Narrow your selection, then compare specifications and pricing.

About NJ200-NJ2200 Series Removable Inner Race

NJ type cylindrical roller bearings have two ribs on the outer ring and one rib on the inner ring. The single inner ring rib lets them take a light thrust load in one direction and locate the shaft in that direction, as well as carrying high radial loads. The inner ring separates from one side, which makes mounting easier. Two NJ bearings mounted facing each other can locate a shaft in both directions.

This category covers light duty NJ200 sizes and the wider NJ2200 sizes, which add radial capacity in the same bore and outside diameter. Cages are brass or steel. In the part number, E marks the higher capacity design and C3 a larger internal clearance than standard.

For heavier loads, see the NJ300 series. See all Cylindrical Roller Bearings.

Ball Bearings

Roller Bearings

Linear Bearings

Mounted Bearings

Specialty Bearings

Have a list, sample, or drawing?