AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft MSRP: Now: $20.04 Add to Cart Compare AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK08 Linear Shaft Support 8mm bore SK8 SH8 SK8 SK08 Linear Shaft Supports Key Features SK08 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.50 Add to Cart Compare AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK10 Stand Up Linear Shaft Support Housing 10mm Shaft SK10 Linear Shaft Supports Key Features SK10 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $8.13 Add to Cart Compare AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK12 Stand Up Linear Shaft Support Housing 12mm Shaft SK12 Linear Shaft Supports Key Features SK12 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $12.58 Add to Cart Compare AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK16 Stand Up Linear Shaft Support 16mm Shaft SH16 SK16 Linear Shaft Supports Key Features SK16 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $7.31 Add to Cart Compare AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK20 Stand Up Linear Shaft Support Housing 20mm SH20 SK20 Linear Shaft Supports Key Features SK20 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.33 Add to Cart Compare AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK Have a list, sample, or drawing? For wholesale quantities, send the available details on our wholesale store and get a quote from the team. Request a wholesale quote Opens in a new tab on our wholesale store. Call 818-545-1900
AMPEC SK25 Stand Up Linear Shaft Support Housing 25mm Shaft SK25 Linear Shaft Supports Key Features SK25 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $19.88 Sold Out Compare AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected × OK
AMPEC SK30 Stand Up Linear Shaft Support 30mm Shaft SK30 Linear Shaft Supports Key Features SK30 Linear Shaft Support is a support for a linear rod that needs additional space on both ends to accommodate the installation of shafts. Used in combination... MSRP: Now: $20.04 Add to Cart Compare About SK Series Metric Linear Shaft Supports SK series shaft supports hold the ends of a metric linear shaft, for shafts from 8 mm to 30 mm. They are pillow block shaped with an adjusting screw that clamps the shaft, and they bolt down to a base. Use one at each end of a shaft that carries closed linear bushings or pillow blocks. For flange mounted supports, see the SHF series; for inch shafts, the SKW series. See also Linear Shafts and all Linear Shaft Support Blocks. Compare Selected
